Appearance Contemporary coffee tones, natural variation from tile to tile. The fossilized shells inherent in the stone provide an interesting yet understated appearance. Minimal holes in surface.
Properties Hard. Natural colour variation hides marks. Cool underfoot. Moderate slip resistance. Accurately sized, cuts well and is easy to lay.
Maintenance Requires sealing. Seal with penetrating sealer to make cleaning easier. Use pH neutral cleaners. Do not use acid to clean.

Mid range - slightly higher than grey granite, concrete, sandstone and porcelain.

Profile options

Tiles, bullnose, square edge coping.
(Tiles also available in a polished finish for indoor use.)

Bullnose - 400 x 400 x 20mm & 30mm
- 600 x 400 x 30mm
- 600 x 600 x 20mm & 30mm

Square Edge Coping - 400 x 400 x 20mm & 30mm
- 600 x 400 x 30mm
- 600 x 600 x 20mm & 30mm

Dune Limestone


Tiles - 400 x 400 x 20mm &30mm / 600 x 400x 30mm / 600 x 600 x 20mm & 30mm

Custom Orders: Other sizes available - allow 12-14 weeks from order

General conditions for natural stone
Due to the colour variations inherent in natural stone, care should be taken when laying your tiles. It is recommended that tiles/pavers from all crates should be blended as the job proceeds. Both thickness and dimensions may vary up to +/- 2mm. Therefore, tiles may have to be graded accordingly.

Disclaimer: The colours shown here should be used as a guide only. All computer monitors vary and hence the colours will vary depending on the monitor on which they are viewed. For a more accurate indication of colours, ask your pool builder to show you tile samples.

© 2003-2013 by The Pool Tile Company. All rights reserved. No reproduction without written permission.

Home | Company Profile | Why use Tiles | FAQ's | Links | Site Map | Contact us

3/75 Longland Street, Newstead Queensland 4006 | (07) 3854 0462