Mercury Porcelain Tiles & Outdoor Pavers


Description Mercury Porcelain, mottled and earthy grey in colour, able to blend with either warm or cool tones provides an option for those who seek a concrete-look around their pool and surrounds.  A minimalist, modern looking pool edge has long been a sort after aesthetic and Mercury Porcelain delivers a similar feel and look to concrete, without the need for sealing.
Why choose Mercury Porcelain?Mercury porcelain tiles are hard, dense and durable, making them very resistant to staining. The ‘Grip’ finish is rated P5 due to the non-slip finish on the tiles, making them ideal for use around swimming pools and outdoor areas. The surface finish is comfortable on the skin and gentle enough for swimming costumes. The tiles are accurately sized, cut well and are easy to lay. Mercury Porcelain provides a modern, minimalist look without compromising practicality and the enduring beauty of your pool edge.
More product details below photos.



More details for Mercury

MaintenanceMinimal maintenance is required and these tiles do not require sealing. Porcelain's dense surface absorbs very little moisture, so spills that might seep into another material and cause a stain, can easily be wiped up with a damp cloth or hosed off. Mercury Porcelain generally only needs to be swept and regularly cleaned with water and a mild detergent.
Relative PricingMid range – higher than Himalayan Quartz and concrete. Similar to Light Grey Granite. Cheaper than Travertines.
Tile Finish & SizesGrip finish (outdoor) – 400 x 400 x 20mm, 600 x 400 x 20mm, 600 x 600 x 20mm
How many before they repeat?24 different tiles 400 x 400 x 20mm
12 different tiles 600 x 400 x 20mm
12 different tiles 600 x 600 x 20mm
This makes it difficult to tell they are not natural stone tiles.
AvailabilityAll sizes are in stock now
Slip Rating (Wet Pendulum)A P5 (V) pendulum classification, (AS 4586) “New surfaces” is the highest wet pendulum classification available under the current standards. For pool surrounds, a minimum of P4 is required.
Coping Tile Edge ProfilesBullnose, Square edge, Dropface.
Please check production lead time at the time of ordering as we process on an order by order basis.
Matching Skimmer Box Lid OptionsQuad premade Mercury inlay skimmer lid
HIDE Skimmer Lid Kit icon to indicate hyperlink opens in new tab (For onsite install)


NOTE: Please click on this link for installation instructions for Mitred Dropface.

Disclaimer: Both thickness and dimensions may vary up to +/- 1mm. Therefore, tiles may have to be graded accordingly.



The colours shown here should be used as a guide only. All computer monitors vary and hence the colours will vary depending on the monitor on which they are viewed. For a more accurate indication of colours, ask us or your pool builder for tile samples.


Back to Top